Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor II

VSF Port Mismatch over DAC Cabel

Hey,

 

we have a 3 member 2930f stack and a problem between member 2 and 3. One port ist down and the other side is down with Error: Port speed mismatch. This is the vsf config:

 

 

switch(config)# sh vsf


 VSF Domain ID    : 1
 MAC Address      : 089734-ab460b
 VSF Topology     : Chain
 VSF Status       : Active
 Uptime           : 1d 22h 7m
 VSF MAD          : None
 VSF Port Speed   : 10G
 Software Version : WC.16.07.0002

 Mbr
 ID  MAC Address       Model                                 Pri Status
 --- ----------------- ------------------------------------- --- ---------------
  1  089734-ab4600     Aruba JL558A 2930F-48G-740W-PoE+-4... 255 Commander
  2  089734-ab6400     Aruba JL558A 2930F-48G-740W-PoE+-4... 128 Member
  3  089734-abd0c0     Aruba JL558A 2930F-48G-740W-PoE+-4... 128 Standby
nsrb845k1(config)# sh vsf link detail


 VSF Member: 1     Link: 1

 Port     State
 -------- ------------
 1/52     Up: Connected to port 2/51


 VSF Member: 1     Link: 2

 Port     State
 -------- ------------
 1/51     Up: Connected to port 3/52


 VSF Member: 2     Link: 1

 Port     State
 -------- ------------
 2/51     Up: Connected to port 1/52


 VSF Member: 2     Link: 2

 Port     State
 -------- ------------
 2/52     Down


 VSF Member: 3     Link: 1

 Port     State
 -------- ------------
 3/51     Error: Port speed mismatch


 VSF Member: 3     Link: 2

 Port     State
 -------- ------------
 3/52     Up: Connected to port 1/51

nsrb845k1(config)#

We already tried another DAC cable but with no effect. Also set the vsf port speed to 10g.

 

Kind regards

Daniel

 

MVP Expert

Re: VSF Port Mismatch over DAC Cabel

A (sanitized, without S/Ns) show tech transceivers CLI Comman's output would help

Occasional Contributor II

Re: VSF Port Mismatch over DAC Cabel

Cmd Info : show tech transceivers

transceivers

Transceiver Technical Information:
 Port # | Type      | Prod #     | Serial #         | Part #
 -------+-----------+------------+------------------+----------
 1/49   | 1000SX    |     J4858D | xxx       | 1990-4395
 1/51   | SFP+DA1   |     J9281D | xxx       | 8121-1300
 1/52   | SFP+DA1   |     J9281D | xxx       | 8121-1300
 2/51   | SFP+DA1   |     J9281D | xxx       | 8121-1300
 2/52   | SFP+DA1   |     J9281D | xxx       | 8121-1300
 3/50   | 1000SX    |     J4858D | xxx       | 1990-4395
 3/52   | SFP+DA1   |     J9281D | xxx       | 8121-1300


show time
Wed Nov 28 10:40:29 2018


=== The command has completed successfully. ===

Here is the tech output. I also have a show tech all in the backhand.

MVP Expert

Re: VSF Port Mismatch over DAC Cabel

Why do you have some 1000SX interface ?

the speed need be the same on the VSF.




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
MVP Expert

Re: VSF Port Mismatch over DAC Cabel

AFAIK...interfaces 1/49 and 3/50 don't play a role into his VSF deployment...so far, so good with those 1000SX interfaces.

All other VSF involved ports are connected to DACs.

MVP Expert

Re: VSF Port Mismatch over DAC Cabel


@parnassus wrote:

AFAIK...interfaces 1/49 and 3/50 don't play a role into his VSF deployment...so far, so good with those 1000SX interfaces.

All other VSF involved ports are connected to DACs.


Oups...




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Occasional Contributor II

Re: VSF Port Mismatch over DAC Cabel

The 1/49 and 3/50 are our uplink ports to the distribution,

MVP Expert

Re: VSF Port Mismatch over DAC Cabel

You have always the issue ?

 

What your VSF configuration (show run and vsf stuff ?)




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: