Wired Intelligent Edge

last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Vlan tagging issue Epson projectors going into error mode

This thread has been viewed 0 times

  • 1.  Vlan tagging issue Epson projectors going into error mode

    Posted Jul 03, 2019 10:27 PM

    Hi, I'm new to Airheads but have been using HPE/Aruba switching for a while now.

    In preparation for installing a new WiFi solution I have been adding our wireless vlans and taging the ports on our fleet of HP/Aruba switching so the WAPs once connected can use the different vlans. The issue I have is any ports that currently have Epson projectors connected have caused an issue where the projectors lock up and turn off the display. The projectors are still on the default vlan and have only had the extra vlans tagged. e.g.

     

    Deafult vlan 1 untagged

    Wireless vlan 100 tagged

     

    The switch is connected to a core switch via a trunk group and the TRK port is also tagged for the extra vlans.

     

    I can upload a copy of one of the configs if needed.

    Any suggestions or help would be much appreciated.

     



  • 2.  RE: Vlan tagging issue Epson projectors going into error mode

    MVP GURU
    Posted Aug 06, 2019 06:17 AM

    Hi,

     

    Do you have fix your issue ?

    Why don't remove tagg on ESPON projectors port ?