Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Contributor II

Wired Apple TV

We are attempting to hook up an Apple TV to a wired network on a seperate layer 3 network from the controllers/Clearpass.

 

Our wireless clients are connecting to the vlan's tunneled back to the controller/Clearpass layer 3 network.

 

Is there a way we can have these wireless clients connect back to the wired Apple TV's?

 

We already use Airgroup a wireless-wireless setup, and Clearpass to limit which Apple TV's each client can see.  We typically have >50 Apple TV's in each location, and if possible we'd like to plug these into the wired network in the hopes that it would be more reliable.

 

Thanks in advance!


Accepted Solutions
Highlighted
Moderator

Re: Wired Apple TV

Yes, there is a new feature in AOS 6.4.3 called AP multicast aggregation for exactly this purpose:

 

http://community.arubanetworks.com/t5/Controller-Based-WLANs/Multicast-Aggregation-at-AP/ta-p/240519

 

Just be sure there's at least one access point on the same network segment as the AppleTV.



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
Moderator

Re: Wired Apple TV

Yes, there is a new feature in AOS 6.4.3 called AP multicast aggregation for exactly this purpose:

 

http://community.arubanetworks.com/t5/Controller-Based-WLANs/Multicast-Aggregation-at-AP/ta-p/240519

 

Just be sure there's at least one access point on the same network segment as the AppleTV.



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Highlighted
Guru Elite

Re: Wired Apple TV


@Ben_Wilson_LPS wrote:

We are attempting to hook up an Apple TV to a wired network on a seperate layer 3 network from the controllers/Clearpass.

 

Our wireless clients are connecting to the vlan's tunneled back to the controller/Clearpass layer 3 network.

 

Is there a way we can have these wireless clients connect back to the wired Apple TV's?

 

We already use Airgroup a wireless-wireless setup, and Clearpass to limit which Apple TV's each client can see.  We typically have >50 Apple TV's in each location, and if possible we'd like to plug these into the wired network in the hopes that it would be more reliable.

 

Thanks in advance!


Brian_Wilson_LPS, the easiest way to deal with this is to trunk that VLAN to the controller somehow, so that all of the wired devices will be populated in the controller.  You can then enter the wired mac into clearpass and decide who can and cannot see that appleTV based on what ap or ap-group they are associated to...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Frequent Contributor I

Re: Wired Apple TV

How much of a burden is it to tie a Wired AppleTV to a specfic AP. Any User on AP-X can see AppleTV-X

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: