Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

2.4 ghz Interference

This thread has been viewed 0 times

  • 1.  2.4 ghz Interference

    Posted Oct 09, 2018 08:09 AM

    Hi all,

     

    I have a production enviroment where some UV lamps is generation noise on the 2,4 ghz area and shielding those it not really an option :(

     

    I have forced 5ghz on specific "voice SSIDs", but I was wondering if I could disable/turn off 2,4 ghz "per AP level"? -And where in AOS?

     

    Any suggestions for other alternatives?

     

    At the moment, the impacted AP's topping at 95-98% of interference.

     

    Setup it two 7205 controllers running 8.2.1.0

     

    Best regards,



  • 2.  RE: 2.4 ghz Interference

    MVP EXPERT
    Posted Oct 09, 2018 08:31 AM

    You can turn this off at the VAP level (Virtual AP -> Allowed Band) or at a radio level (configure the 802.11g radio profile Mode to be "am-mode".



  • 3.  RE: 2.4 ghz Interference

    Posted Oct 09, 2018 09:20 AM

    So you mean in Configuration=>System=>Profiles=>Wireless LAN=>Virtual AP=> for the "allowed band"

     

    And

    Configuration=>System=>Profiles=>RD Management=>2.4 ghz radio (But which profile??)