Wireless Access

Occasional Contributor II

2.4GHz report trend



I was wondering if it would be possible to create or view a report in either AirWave or onthe Controller that will show me some history in regards to clients on the 2.4Ghz band.  For example, if I could see a trend over a month and if I could see the types of devices that are using this band.  Thank you.



Not applicable

Re: 2.4GHz report trend

Any ideas @rgin


Re: 2.4GHz report trend

If you're just eyeballing it, the RF Capacity page is pretty useful, but it is limited to a 24 hr view.


You're best bet would be to run a Client Session report, and make sure to include connection mode list and details, and then details for all sessions.  This way you can sort by connection mode.


For the 1 month part, you need to make sure that you're maintaining a months worth of data, otherwise it will only provide data points for the data that exists in the database.  Check AMP Setup -> General -> Historical Data Retention values for Client Associations and Inactive Clients.  These 2 settings determine how long client data is maintained in the database.

Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
Showing results for 
Search instead for 
Did you mean: