Hello all,
I have 2 SSID's that serve the same purpose and I would like to disable one of them. SSID "X" was created a while back and SSID "Y" was done with our clearpass integration. SInce then I have upgraded most of our AP's to 315's and our controllers to 7210's. One issue I am seeing is that older devices primarily Mac laptops and IOS devices will not connect to ssid "Y". They usually are macs running older OS X softare like 10.5 or 10.6...perhaps 10.7. If the hardware will support an OS X upgrade to the latest or one version older it works fine. I had an iPad 1 in my office one day and I could not get it working on the "Y" ssid. I am not sure where to start but here are my SSID configs of what is different on them. I am aware there are a lot of settings and these might not even be what is needed so please let me know if you need more information.
SSID "Y" - New SSID | SSID "X" - Old SSID |
802.11g Basic Rates 12 18 | 802.11g Basic Rates 1 2 |
802.11g Transmit Rates 12 18 24 36 48 54 | 802.11g Transmit Rates 1 2 5 6 9 11 12 18 24 36 48 54 |
DSCP mapping for WMM voice AC (0-63) N/A | DSCP mapping for WMM voice AC (0-63) 56 |
DSCP mapping for WMM video AC (0-63) N/A | DSCP mapping for WMM video AC (0-63) 40 |
DSCP mapping for WMM best-effort AC (0-63) N/A | DSCP mapping for WMM best-effort AC (0-63) 24 |
DSCP mapping for WMM background AC (0-63) N/A | DSCP mapping for WMM background AC (0-63) 8 |
BC/MC Rate Optimization Disabled | BC/MC Rate Optimization Enabled |
802.11g Beacon Rate 12 | 802.11g Beacon Rate default |
802.11r Profile 802.11r Advert | 802.11r Profile N/A |