Wireless Access

Frequent Contributor II

620 demo controller upgrade

Hi guys


we have a new demo kit of 620 controller, it came with AOS


I am trying to upgrade to 6.1 or 6.2 but everytime it says:


* WARNING: An additional image upgrade is required to complete the *
* installation of the AP and WebUI files. Please upgrade the boot *
* partition again and reload the controller. *


I upgraded AOS to 3.4.5.x it seemed fine but then to but still same message above!


what to do now ?

Guru Elite

Re: 620 demo controller upgrade

Upgrade the same partition to again.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: 620 demo controller upgrade

Older version cannot be upgraded directly to some of the newer code versions.    As Colin suggests, upgrading the controller to again should resolve your issue.  For future upgrades, refer to the following guidelines (each release notes version covers the requirements).


You can directly upgrade from

  •  6.0.1.x or later
  •  or later
  •  or later

Upgrading From an Older version of ArubaOS
Before you begin, verify the version of ArubaOS currently running on your controller. If you are running one
of the following versions of ArubaOS, you must download and upgrade to an interim version of ArubaOS
before upgrading toArubaOS

  • For ArubaOS 3.x.versions earlier than ArubaOS, download the latest version of ArubaOS
  • For ArubaOS RN-3.x or ArubaOS 5.0.x versions earlier than ArubaOS,download the latest
    version of ArubaOS 5.0.4.x.
  • For ArubaOS versions or, download the latest version of ArubaOS 6.0.1.x.


Systems Engineer, Northeast USA

Search Airheads
Showing results for 
Search instead for 
Did you mean: