Wireless Access

New Contributor

650 POE+ Support

According to the 600 series' datasheet, the 650 controller supports POE+. However, I have an AP225 that is plugged in to one of the 650's ports and it reports that it's running in "Restricted" mode which happens when the AP only detects 802.3af (not 802.3atat). If the 650 supports POE+ why would the 225 be running in restricted mode? Is the datasheet incorrect, or is there some setting I'm missing?






Re: 650 POE+ Support



I'm not sure about the POE capabilities of the 650 controller (it's an old model and has been EOS for some time), but you could try to enable the ap2xx-prestandard-poe-detection provisioning parameter for the AP.

Search Airheads
Showing results for 
Search instead for 
Did you mean: