Wireless Access

Reply
Contributor I

7024 as Core Switch

Hi there, we are going to buy a 7024 MC and are curious - if we can use this MC as a Core Switch - because we will use 3 edgeswitches in this venue. Note we only use 16 AP's and will have max 1000 concurrent users.

 

Is this possible to use the 7024 as Core Switch as well - has it enough capacity?

Guru Elite

Re: 7024 as Core Switch

You could use it as a core switch for routing, yes.  The question is, is there anything specific or special that you intend to do, besides typical routing?  


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Contributor I

Re: 7024 as Core Switch

Great, it is normally used for standard routing, act as a core switch with 3 more edge switches connected to it - at those 3 edge switches 6 APs are connected each.

Guru Elite

Re: 7024 as Core Switch

Yes it can, but you should test in the lab to make sure it applied specifically to your use case.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: