Wireless Access

Reply
Highlighted
Super Contributor II

Re: 7200 series SFPs

Does anyone else know a possible reason for this?

Guru Elite

Re: 7200 series SFPs

MattF:

 

This is from the installation guide below:  I am marking this thread solved. 

 

You should get an Aruba-supported SFP and retest to see if the port is bad.

7200.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Highlighted
Aruba

Re: 7200 series SFPs

MattF,

To add, without more detail in terms of show command outputs, there is no explanation for why the optic would work in one port and not the other.

 

As Cjoseph has said, we only officially support and warranty our own optics will work in all cases in all ports of our products so without more to go on, that is the best we can go with at this point.

 

Best regards,

 

Madani

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: