Wireless Access

last person joined: 14 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

802.1x bypass

This thread has been viewed 2 times

  • 1.  802.1x bypass

    Posted Nov 25, 2014 11:41 AM

    Not sure if I am missing something here.  We have a handheld scanner device that I am trying to get on our internal wirless.  I tried using the User derivation rule using the mac address of the device and put it in 'Authenticated' role.  I even tried the server derivation rule with mac address.  The device does not connect.  The internal SSID setup uses certificate validation against a Windows NPS server.  I would like to bypass this if possible.  Any suggestions are welcomed.

     

    Thanks,

     

    Bill



  • 2.  RE: 802.1x bypass

    EMPLOYEE
    Posted Nov 25, 2014 11:42 AM
    Does the device support 802.1X?


  • 3.  RE: 802.1x bypass

    Posted Nov 25, 2014 11:58 AM

    It does.  Device has Windows CE platform on it.  Trying avoid putting a cert on it if I can...



  • 4.  RE: 802.1x bypass
    Best Answer

    EMPLOYEE
    Posted Nov 25, 2014 12:05 PM
    You could configure NPS to allow PEAP as well and use a username/password on the device.


  • 5.  RE: 802.1x bypass

    Posted Nov 25, 2014 02:24 PM

    Anyway we could use User Rules to set role to authenticate?



  • 6.  RE: 802.1x bypass

    EMPLOYEE
    Posted Nov 25, 2014 02:28 PM
    No. You still have to pass 802.1X authentication.


  • 7.  RE: 802.1x bypass

    Posted Dec 05, 2014 10:20 AM

    Had the NPS admins add new policy for PEAP auth. New user account and password created.  All works like a champ.  Thanks for the help.