Hi Guys,
I have a couple of clearpass services setup in this order
1) 802.1x authentication for wired user (Radius:IETF value = login-user/Framed-user/Authenticate-only)
2) 802.1x autnetucation for wireless user (Radius:IETF value = Wireless-802.1/login-user/Framed-user/Authenticate-only)
3) Mac-authentication (Radius:IETF value = Ethernet/login-user/call-check/Client-Mac)
I have a handful of users (20) are always connecting to a wrong services even though they have their 802.1x settings enabled for the ethernet adaptor. The user is supposed to be connecting through service one but was rejected due as the service matched is (3).
Please advise