Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

ADP problem

This thread has been viewed 16 times

  • 1.  ADP problem

    Posted Sep 22, 2016 08:24 AM

    On a Aruba 730 I'm traing to connect the AP. I manualy set the ip address on the Ap. The Ap ip is on the same subnet of the controller. After boot the ap don't discover the controller and it elect itself to a master. I also connect the ap to same switch of the controller but the same result. The adp on the controller is enable. Is there some firewall rule on the controller that block the join ? Is there some debug ?

    Thanks



  • 2.  RE: ADP problem
    Best Answer

    EMPLOYEE
    Posted Sep 22, 2016 12:40 PM

    Server discovery only happens with DHCP.  You need to set the server ip address manually when you use a static ip address...