Wireless Access

Reply
3vi
Occasional Contributor I

ADP problem

On a Aruba 730 I'm traing to connect the AP. I manualy set the ip address on the Ap. The Ap ip is on the same subnet of the controller. After boot the ap don't discover the controller and it elect itself to a master. I also connect the ap to same switch of the controller but the same result. The adp on the controller is enable. Is there some firewall rule on the controller that block the join ? Is there some debug ?

Thanks

Guru Elite

Re: ADP problem

Server discovery only happens with DHCP.  You need to set the server ip address manually when you use a static ip address...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: