Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
We recently updated from OS 5 to OS 6. Now airplay no longer appears to work. I cant find any settings for airgroup in the cli or the GUI. Has anyone run into this before?
Hi,
It should be there under configuration, make sure airplay is turned ON from there.
some useful commands (cli)
show airgroup status - check airplay is ON
Show process monitor statistics - to check mdns is running
Good Luck
I thought it should be there under advanced. Here is what I have.
could u verify from cli,
Airgroup is not an available option for the show command.
can u try enable airgroup from cli, or may be your software version doesnt support airgroup.
Airgroup isnt an option for enable. Here is the version I am running.
@praetorrian wrote: Airgroup isnt an option for enable. Here is the version I am running.
Airgroup is only available in ArubaOS 6.3. and above, or the technology release 6.1.3.6-airgroup (not recommended). You will not see the airgroup commands outside of those releases.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.