Wireless Access

Reply
Occasional Contributor I

AMON MMVA and AirwaVe

Hello,

 

We are configuring AMON to AMP with ip 192.168.16.62 

Is this all the config necessary - we do not need DTLS encr.

#show running-config | include mgmt-server
Building Configuration...
mgmt-server primary-server 192.168.16.62 profile default-amp transport udp
mgmt-server profile "default-acp"
mgmt-server profile "default-ale"
mgmt-server profile "default-amp"
mgmt-server profile "default-controller"
mgmt-server profile "default-niara"

 

#show mgmt-server message-counters process ctamon

Mgmt Config profile "default-amp" (Predefined (changed))

--------------------------------------------------------

Parameter                           Value

---------                           -----

Stats                               Enabled

Stats_Ext                           Disabled

Generic_amon                        Enabled

Tag                                 Enabled

Sessions                            Enabled

Monitored Info - Add/Update         Disabled

Monitored Info - Deletion           Disabled

Monitored Info - Periodic Snapshot  Disabled

User_visibility                     Enabled

Wireless IDS Event Info             Enabled

Misc                                Enabled

Location                            Enabled

UCC Monitoring                      Disabled

AirGroup Info                       Disabled

Inline DHCP stats                   Enabled

Inline AP stats                     Enabled

Inline Auth stats                   Enabled

Inline DNS stats                    Enabled

 

Is  this the command to view among messages sent by MM to AirWave?

 

If there is something wrong, please point the right document.

(ArubaMM-VA) [mynode] (config) #show mgmt-server message-counters process ctamon

Message Counter History
-----------------------
Message Number Time Packets

WAN State Info                      Disabled

Inline LLDP stats                   Disabled

AP stats                            Disabled

 

BR,

 

Occasional Contributor I

Re: AMON MMVA and AirwaVe

Additional info:
(CNSYS-WLC-1) [MDC] *#show mgmt-server message-counters process vrrp

Message Counter History
-----------------------
Message Number Time Packets VRRP Master Redundancy Info
-------------- ---- ------- ---------------------------
3496 Thu Jun 27 10:45:59 2019 1 1
3495 Thu Jun 27 09:45:53 2019 1 1
3494 Thu Jun 27 08:45:48 2019 1 1
3493 Thu Jun 27 07:45:42 2019 1 1
3492 Thu Jun 27 06:45:37 2019 1 1
3491 Thu Jun 27 05:45:32 2019 1 1
3490 Thu Jun 27 04:45:26 2019 1 1
3489 Thu Jun 27 03:45:21 2019 1 1
3488 Thu Jun 27 02:45:15 2019 1 1
3487 Thu Jun 27 01:45:10 2019 1 1
3486 Thu Jun 27 00:45:04 2019 1 1
3485 Wed Jun 26 23:44:59 2019 1 1
3484 Wed Jun 26 22:44:53 2019 1 1
3483 Wed Jun 26 21:44:48 2019 1 1
3482 Wed Jun 26 20:44:43 2019 1 1
3481 Wed Jun 26 19:44:37 2019 1 1
3480 Wed Jun 26 18:44:32 2019 1 1
3479 Wed Jun 26 17:44:26 2019 1 1
3478 Wed Jun 26 16:44:21 2019 1 1
3477 Wed Jun 26 15:44:15 2019 1 1
(CNSYS-WLC-1) [MDC] *#show mgmt-server message-counters process ctamon

Message Counter History
-----------------------
Message Number Time Packets
-------------- ---- -------

 

 

Highlighted
MVP Guru

Re: AMON MMVA and AirwaVe

Have you enabled Prefer AMON over SNMP within AirWave configuration? You can view if AirWave is processing AMON information via the System -> Peformance page.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
MVP Guru

Re: AMON MMVA and AirwaVe

* double post ;) *


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: AMON MMVA and AirwaVe

Thanks for the fast response.

When I click prefer amon button the devices fall from 150 to 18.

Lots of devices are not speaking amon - this should prefer amon, but will use snmp still ?

Here are the two snips attached

 

Regards,

 

MVP Guru

Re: AMON MMVA and AirwaVe

Do the devices matchup with what you see on your controller? What AOS &
AirWave versions are you running? Don't forget it will take (depending on
the poll time you have configured...) a while for AirWave to poll the
devices.

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: AMON MMVA and AirwaVe

AMP =  8.2.8.2

 

MM/2 7010 = 8.4.0.0_68230

 

When prefer AMON is enabled we experience the following issues(attached)

CLient count fluctuates up and down. In the and you can see it stabilized as I turned SNMP only. 13:45

Guru Elite

Re: AMON MMVA and AirwaVe

in Airwave, you should be able to go to System> Performance> Amon Statistics to see if you have any AMON coming in.  You should leave Prefer Amon OFF for now.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Occasional Contributor I

Re: AMON MMVA and AirwaVe

Hi,

 

The requested info is attached. 

Not sure if this correct? the count is very low?

Prefer AMON is OFF**

Occasional Contributor I

Re: AMON MMVA and AirwaVe

Solved.

With UPG to AMP 8.2.9.0

 
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: