Hi,
We are deploying a wireless solution with 500+ ap-105. All the access points can find the controller (via DNS) and appear in the ap-configuration section. The problem is that some of them appear directly with ID flag (inactive and dirty/no config). I've tried to provision and assign them to their ap-group (via WEBui) but the provision fails. The access points seems to be not aware of this provision and do not reload to change their config.
The controller is a 6000 with M3. The access points are configured as remote ap.
The question is, could we recover those access points without going to the remote site and do a purgeenv locally?
Thanks
Jose