Wireless Access

last person joined: 5 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-205's 5.Ghz and 2.4Ghz not booting properly

This thread has been viewed 0 times

  • 1.  AP-205's 5.Ghz and 2.4Ghz not booting properly

    Posted Sep 16, 2020 12:14 AM

    Hello,

     

    I'm having problems with regards to AP-205 for the past few days. So, here's the problem:

     

    We're trying to boot up one of the APs that we have in our office but, only Power and Enet boots up and both of them blinking continuously. We're trying to wait for 5-10 mins to see if the 2.4Ghz and 5Ghz led indicator will boot up but, it won't boot up. We tried to purge the configurations but it won't boot at all.

     

    EDIT: It has also standby IP when this thing happens

     

    Do you know anything that causes like this? Thanks.



  • 2.  RE: AP-205's 5.Ghz and 2.4Ghz not booting properly

    MVP GURU
    Posted Sep 16, 2020 08:21 AM

    Would it be possible for you to post the output of a console session while it is booting up? That should start us in the right direction.