09-17-2014 10:04 PM
We have 2 AP275 using with 3400 controller. the problem is that the AP is getting sync. with the controller but the radios wont comeup ( not showing the channels)and on the AP red steady LED is stowing (not blinking)
we are using the power injectors which is PD-9001GR-AC but with no luck.
initialy one of the AP came up but only worked for 15 mins but stopped after that. is there anything related with power ?
Solved! Go to Solution.
Re: AP-275 radios not coming up
09-18-2014 12:44 AM
I assume you have provisioned the AP's in a AP group with at least one VAP.
Are there any flags related to the AP in the AP Installation overview?
The controller needs to be upgraded to 6.4, but i assume this is done, otherwise you would not be seeing the AP's.
I have witnessed something somewhat similar. In my installation, the DNS domain for the AP was different from what the aruba-master DNS record was showing.
I'm now assuming you are using DNS as the primary solution for the AP to get hold of the controller.
My AP-205 was experiencing much of the same when the DNS domain was wrong. The AP stayed up for longer or shorter periods, but giving med ID flags.
09-18-2014 01:04 AM
Take a look at this post aswell
Seems to be an issue with AP-275 and power consumption.
You might need to enable LLDP on the switch.