Wireless Access

This community is currently in a read-only state due to a maintenance window. For more info click here
Reply
Highlighted
Occasional Contributor II

AP-303P

When I connect second AP to E1 port on AP-303P it does not get get POE. First AP gets poe from Aruba 2930F switch


Accepted Solutions
Highlighted

Re: AP-303P

Which Software Version are you using?

PSE Out is supported from 8.4 onwards and you have to enable it.

 

See attached document to enable it.

 

View solution in original post


All Replies
Highlighted

Re: AP-303P

Which Software Version are you using?

PSE Out is supported from 8.4 onwards and you have to enable it.

 

See attached document to enable it.

 

View solution in original post

Highlighted
Aruba

Re: AP-303P

Also, make sure the AP and switch negotiate 802.3at (class 4) or 802.3bt (class 5) POE. With 802.3af POE, there's no POE-PSE (out) from the AP-303P.

/Onno
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: