Hello,
I'm configuring an Aruba virtual mobilty controller with different APs for a customer.
There are AP-365 which connect and work fine.
There are also AP-318 with Ant-48 which connect to the controller but don't turn the radios on.
In the "show ap database long" they are marked I = inactive
I tried every solution I could find in various discussions, checked everything and found out that they don't get a VAP, which is confusing, since they are in the same AP-Group as the AP-365 which get their VAP and work perfectly.
In another AP-group I have some AP-314 with ANT-48, they also do their job without any problems, for them I even use MAC & dot1x authentication with CPPM.
As I've written, only the AP318 make problems ...
I did a show tech on one of the AP-318 and attached it, maybe someone has a clue, what I missed.