Wireless Access

Reply
Highlighted
New Contributor

AP-367 Setup Issues

Hi All

 

I have 2x new AP-367-RW's that I'm setting up.

 

I have added the AP's MAC address to our DHCP server to create the reservation however when the AP boots the reservation never becomes active.

 

On a tablet, I can see the SETMEUP SSID and can connect to it.

 

However, whenever I put in the user/password (admin/SN) it always says bad username and / or password.

 

I have done a factory reset but the issue still exists and I'm not sure how to get around it.

 

I have the AP added in our Aruba Central but it never gets there as it doesn't seem to be getting an IP address on our network.

 

Not sure where to go from here.

MVP Guru

Re: AP-367 Setup Issues

Can you try admin/admin as the login? Earlier firmwares had that as the default login.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: