Wireless Access

Reply
New Contributor

AP Rmmon failed to boot

Hi,

 

I have a problem with access point. Please help.

 

The password was unrecoverable so as we have reformatted it by using the break key during inital boot. So it enters this mode "ap:"...

After that, I tired the steps of setting an IP adress, netmask, and so forth... and loaded the image from a tftp server. The image is successfully transferred to the AP. But then when it boots, it says "boot failed" and I am still in the "ap:" mode.

 

Please any help here?

Guru Elite

Re: AP Rmmon failed to boot


joy1012 wrote:

Hi,

 

I have a problem with access point. Please help.

 

The password was unrecoverable so as we have reformatted it by using the break key during inital boot. So it enters this mode "ap:"...

After that, I tired the steps of setting an IP adress, netmask, and so forth... and loaded the image from a tftp server. The image is successfully transferred to the AP. But then when it boots, it says "boot failed" and I am still in the "ap:" mode.

 

Please any help here?


Is this a Campus AP or IAP?

What version of code is this?

What AP type is this?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: