Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
Hi i want to know if it is possible that an AP made an GRE tunnel to differents controllers based on the choosen SSID by the client. For example:
Controller A is the end of the GRE tunnel when the SSID A is choosen and controller B when the SSID B is choosen.
Best Regards
That cannot be done, unfortunately. An access point can only have a GRE tunnel to a single controller. Why not put a layer 2 GRE tunnel between the two controllers and MAP the VLAN B to the tunnel, so that the user traffic would effectively end up on controller B?
Thank you for this answer.
Actually, i just want that the trafic ends on controller B when the choosen SSID is B. I guess your solution will be OK. Can you give me the steps needed for this configuration in details please.*
Thank you again.
Please check out the thread here: http://community.arubanetworks.com/t5/ArubaOS-and-Controllers/Using-GRE-Tunnels-to-centralize-L3-access/m-p/2831
Thank for the answer.
Just one last question: For The licence, controller A and B show have the same licence or not?
Thankx again.
You do not need a license for any controller that is not terminating access point traffic (Controller B). If you have other access terminating on that controller, you need licenses for those access points.
Thankx
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.