Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP do not have signal on local controller

This thread has been viewed 0 times

  • 1.  AP do not have signal on local controller

    Posted Nov 29, 2018 09:34 PM

    Hi guys,

    We have two controllers here, their relationship is master-local . When AP belongs to master controller ,it works normally and I can see the SSID from AP. But When AP belongs to local controller , I can't see the SSID 

     

    Here is our conf:

    AP use DHCP get IP from the core switch.  

    Core switch has a AP dhcp pool :

    ip dhcp pool AC
    network 10.80.99.0 255.255.255.0
    default-router 10.80.99.254
    dns-server 10.80.99.231 10.80.99.232
    option 43 ip 10.80.99.231

     

    PS:

    10.80.99.231 is master controller's IP

    10.80.99.232 is local controller's IP

     

    Unnormally situation: I found AP on local controller

    back.png

    Any body had any thought?  



  • 2.  RE: AP do not have signal on local controller
    Best Answer

    EMPLOYEE
    Posted Nov 29, 2018 09:44 PM

    The local controller needs to have user VLANs defined directly on the controller.



  • 3.  RE: AP do not have signal on local controller

    Posted Nov 29, 2018 10:12 PM

    When I add back the vlan , It works,thank you so much....

    @cjoseph wrote:

    The local controller needs to have user VLANs defined directly on the controller.