Wireless Access

Reply
Occasional Contributor II

AP's at mobility controller won't choose channels under 100Mhz

For some reason ap's at our customers mobility controller won't choose channels under 100Mhz when they are set at automatic channel. At all regulatory domains channels 36-64 are allowed. If we disable 100Mhz -> channels from arm we get "

 No valid channels; entering air monitor mode." Error.

 

What makes this case even more weird is that we have another ap-group at the same mobility controller. AP's at that group can use channels under 100Mhz.

 

So the guestion is what config option enables this kind of behavior for ap's.

MVP Expert

Re: AP's at mobility controller won't choose channels under 100Mhz

What country would this be for? And what AP models?

 

Some countries do not allow UNI1 / 2, and sometimes it's dependent on the AP model and how they are provisioned (usually based on the environment)


Jerrod Howard
Distinguished Technologist, TME
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: