Yes, new radio profiles were created for both bands.
I have a new AP Group - AM-SpectrumAnalysis.
New 802.11a radio profile - 5GHzSpectrumAnalysis with mode set to spectrum-mode
New 802.11g radio profile - 2.4GHzSpectrumAnalysis with mode set to spectrum-mode
I can put the AP back into the Office-AP-Group with no problems. I can put the AP back into the default group (AM-Mode) with no problems. When I put the AP into the AM-SpectrumAnalysis group it appears to go into the proper group, but still only gets reported as an Air Monitor.
My SE was helping me with this, but has gotten busy, so I have a feeling my next step is to open a case with TAC. Unfortunately I have bunch of people out the next week or so, so I can't really be sure that I'll have time to dedicate to working with TAC.
The guides seem pretty straight forward. I was hoping there was something I was missing, but I can't seem to find it.