Wireless Access

last person joined: 7 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP105- Speed stuck at 100Mbps.

This thread has been viewed 1 times

  • 1.  AP105- Speed stuck at 100Mbps.

    Posted Mar 13, 2014 09:07 PM

    hi,

     

    We have a 3200 Controller and it is connected to 25 AP's .

     

    Few AP transmitting at 100MBPS with a red flashing light and few at 1Gbps speed with green flashing light.

     

    I tried changing the ports, changing the POE injector, using ports and injectors which deliver 10Gbps speed on the low speed AP.

    I also upgraded the controller's OS version to the new 6.3.1, still the same.

     

    Nothing worked with this AP transmitting at 100Mbps. What am I missing ?

     

    Regards,

    Santhosh.


    #3200


  • 2.  RE: AP105- Speed stuck at 100Mbps.

    EMPLOYEE
    Posted Mar 13, 2014 09:09 PM
    Are you able to test the cable with a tester? How about plugging in a
    laptop?


  • 3.  RE: AP105- Speed stuck at 100Mbps.

    Posted Mar 13, 2014 09:12 PM

    Hi Tim,

     

     

    How do you connect a Ap in a laptop?

     

     

    I have used a cable from a Ap which is transmitting at 1Gbps.

     

    Regards,

    Santhosh.

     

     



  • 4.  RE: AP105- Speed stuck at 100Mbps.

    EMPLOYEE
    Posted Mar 13, 2014 09:17 PM
    Ok, yes I meant use the cable feeding the AP on the laptop.

    Does anything look out of the ordinary when you do a show interface status
    on the switchport while the AP is plugged in?