Hi all,
we have an Aruba650 Controller (AOS 6.4.2.2) with 11 APs. Two of these APs, both AP105, is connected to each other in mesh. We have continuosly some problems with them: as you can see from the sreen below, the mesh-link is ok
but periodically the mesh-link goes down and it doesn't come back active until we reboot the Portal AP.
Can someone give me some explanation of why what happens and any suggestions on how to fix it?
Here I attach the mesh configuration too. Are the parameters ok or do I have t change somethings?
Thanks,
Massimo