Wireless Access

Reply
Regular Contributor I

AP360 Data Sheet - RF Performance Table

The Data sheet for this AP indicates the Max TX power for 5 Ghz is +25 dBm due to local regulatory requirements. If I configure this AP for a Fixed Point-to-Point setup, the regulatory limits according to the FCC are 1000 mWatt (30 dBm) power in the UNII-2 and UNII-3  bands. 

 

Will the AP prevent me from setting it to 30 dBm since the data sheet says max of 25?

 

Thanks!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: