Wireless Access

Hey all, 

i have a trouble with AP 325 Aruba, the AP are steel booting and I can't reset to factory, in the partion i have 0 no os the other partion 1 i have the OS 

apboot> os
Partition 0 does not contain a valid OS image

Partition 1:
image type: 0
machine type: 40
size: 7211308
version: 6.4.4.0-wave2
build string: ArubaOS version 6.4.4.0-wave2 for 32x (p4build@cyprus) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #49847 SMP Thu Apr 30 14:49:32 PDT 2015
flags: preserve factory
oem: aruba

Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.

 

 

i boot it in the partion 1 but steel can't reset it 

i read in the forum that i need to change OS because there is a bug in this version: 6.4.4.0-wave2, i can't download the os somme one can help me please 

 

when the AP boot, it stop in this stat and reboot 

 

 

 

Getting an IP address...
[ 40.157950] Kernel watchdog refresh ended on core 0.
[ 40.277944] Kernel watchdog refresh ended on core 1.
[ 40.722149] eth0: 100Mbps FullDuplex
[ 40.998000] bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex.
[ 41.091783] bonding: bond0: making interface eth0 the new active one.
[ 41.170071] bonding: bond0: first active interface up!
[ 41.230459] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
10.10.10.2 255.255.255.0
Running ADP...

 

 

 

thank you for your help 

The boot log does not show the AP finding its master.

 

Who is the master controller for this AP? 

 

How is the AP set up to discover the master controller?

 

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.

Thank's for the unswer 

I don't have the master how  can i do if i don't 

I have only one AP, because I recovered it to deploy it in another place, i can't get the controler 

 

Hi community 

Please someone have an idea how to reset it.

thank you 

 

If you have a single AP, the model number on the sticker must say IAP-325, otherwise it cannot operate by itself.  You would need a separate hardware controller to work with an AP-325.

Thank you for your answer,

 

You can find the image i juste shared The mode of the AP, even if i setup the IP of the controler in APboot> herself that don't work i get this promp #, all commande don't work because of the permission, all commande look like linux cmd. 

 

Thank's

https://community.arubanetworks.com/t5/Controller-less-WLANs/Where-is-the-reset-button-on-the-IAP-and-how-do-I-reset-the-IAP/ta-p/180980

Right now it's an APusing ArubaOS 6.4.0.0

If you are unsure whether it's an AP or IAP, hard reset the AP.

If it is an IAP variant , it should come back up as an IAP.

This is an AP only variant.

It says ap325 from the image shared. Also it's model is APIN 0325.Thus it needs a controller for it to come up.

Hey all

Thank you so much for the answer, how can i do now if i want to get the controleur, i read in the net i can use AirWave with VM  to controle my AP 325, my question is how to download this for free and where i can download it, i buy this AP 325 very expensive for me 

Thanks  

What is your requirement for the network?

 

A controller based AP also requires a license bundle to be purchased additionally for the AP to be used whether it is virtual or hardware based controller.

 

To use airwave to control the AP , You would first need a standalone MM setup or a MM-MD setup with SNMP&SSH enabled to the airwave server, this just calls for more licenses (MM-VA, MC-VA).

 

If you just want a wifi device that you can plug a ethernet cable with internet access to and get started, then i'd say swap the AP to an IAP Variant.

 

 

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.

hey  my requirement is juste one access point that i can broadcast one ssid, with my AP 325 i cannot configure that because th AP need a controler, before i work with IAP 515  and  IAP 315 those categorie does't need a controleur and i can easly create, but with AP325 i can't do anything, 

can i swap the AP to an IAP for this same physical model , because i just want a wifi devide that i plug a ethenet cable with internet access .

thank's

 

If that is your requirement then an IAP is a better way to go.

 

Contact your reseller/partner and enquire about changing the AP to an IAP.

 

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.

 

I have the same access point with the same firmware  ArubaOS version 6.4.4.0-wave2 for 32x (p4build@cyprus) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #49847 SMP Thu Apr 30 14:49:32 PDT 2015

   I connect it to the controller 8.6.0.4, the AP downloads the firmware and goes into reboot, after rebooting, when I try to adopt, I get an error: Сan not reprovision AP with older image until it upgrades. and every 2 to 3 minutes downloads the firmware and  keep on reboot

how to update the AP?

------------------------------
Dmitriy Dmitriy
------------------------------

Original Message:
Sent: Oct 09, 2019 09:46 AM
From: AJAY KUMAR RAVIPATI
Subject: Access Points 325

If that is your requirement then an IAP is a better way to go.

 

Contact your reseller/partner and enquire about changing the AP to an IAP.

 

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.

 

?

------------------------------
Dmitriy Dmitriy
------------------------------

Original Message:
Sent: Oct 09, 2019 09:46 AM
From: AJAY KUMAR RAVIPATI
Subject: Access Points 325

If that is your requirement then an IAP is a better way to go.

 

Contact your reseller/partner and enquire about changing the AP to an IAP.

 

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
--Problem Solved? Click "Accepted Solution" in a post.