Wireless Access

Reply
Occasional Contributor I

Aruba 620 controller where would I lock down an AP transmit power to 50mw

Trying to locate in the ARUBA controller  620 where I can lock down the transmit power setting on an AP

Guru Elite

Re: Aruba 620 controller where would I lock down an AP transmit power to 50mw

In the ARM profile, there is an ARM MIN and MAX TX power in dbm.  That determines the minimum and maximum power for an AP.  Convert from watts and make the dbm the same in the min and max tx power, and it will constrain it to your number.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: