Wireless Access

Contributor I

Aruba Instant Auth Server Priority

Hi Guys,


We recently setup Clearpass with a US based publisher and EU based subscriber, mainly to provide an authentication point closer to clients in each region, reducing latency and authentication times.


We have the two auth sources configured In the Instant configuration in case of failure, question is, how do I default the US AP's to the pub and the EU AP's to the sub in each respective region? - I don’t see any priority settings etc on the instant AP's?

Guru Elite

Re: Aruba Instant Auth Server Priority

Whatever server is listed first will be tried first, until it does not respond.  Configure your EU clusters with the EU server first and the US Clusters with the US  server first.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Contributor I

Re: Aruba Instant Auth Server Priority

Ahh simple as that... I was over complicating it... thank you!

Search Airheads
Showing results for 
Search instead for 
Did you mean: