Hey everyone,
im a fresh user int the aruba mobility controller and mobility master world. I want to setup a stanrd mm => mc (Cluster) Setup.
On my Mobility Cluster (7220) i got 2 Interfaces.
One 0/0/0 with VLAN 402 and an IP-Adress (MC-01 10.3.3.154; MC-02 10.3.3.155)
Another one 0/0/2 with VLAN 102 and the IP-Adress (MC-01 10.1.2.231; MC-02 10.1.2.232)
Now i want to build the mobility Cluster over the MM.
But i can only choose the Interface 0/0/0 eg. 10.3.3.154 as the Interface/IP for the Clustering ?
I want to build up the Cluster over the Interface 0/0/2 and the IP-.Adresses 10.1.2.231 because the other one is the Management Network where only the configuration MM => MC should work in.
I want to have the CLuster on this 0/0/2 Interface eg VLAN 102, where our core is connected to and the APs then should connect to.
Any Ideas why i cant choose the other Interface eg. IP-Adresses at the Cluster Building Menu ?