Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba Performance and troubleshooting Recommendations

This thread has been viewed 3 times

  • 1.  Aruba Performance and troubleshooting Recommendations

    Posted Dec 18, 2017 06:14 PM

    Hi, a customer just deployed a new aruba network with 7030 controllers and AP325 waps. They are asking why the average client speed is 300mb when aruba adverstises speed up to a gig. Im looking for someone to provide a good explaination on that please? 

     

    Additionally, I would like to learn how to better understand all the graphs and issues in the controller dash board. Things like client health, SNR, goodput etc. A cheat sheet that can explain what are good/bad values? 

     

    any any other recomemdnations for tuning a wireless network like above to get best performance. Thxs 



  • 2.  RE: Aruba Performance and troubleshooting Recommendations

    EMPLOYEE
    Posted Dec 18, 2017 06:57 PM

    The ins and outs of potential speed vs. real-world speed is here:  https://www.intel.com/content/dam/www/public/us/en/documents/pdf/next-gen-80211ac-wifi-for-dummies.pdf

     

    On the dashboard, there is a help button in the upper right hand corner.  Click on it and hover over each term for an explanation.



  • 3.  RE: Aruba Performance and troubleshooting Recommendations

    Posted Dec 19, 2017 01:31 AM
    Hi, try to review the channel width (20-40-80) depends the band you use, and the clients network cards (1x1:1 or 2x2:2,..) and the band you use 2,4gb or 5gb, test it, good luck.