Wireless Access

last person joined: 7 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Aruba Recommended Practice for Basic and Transmit Rates

This thread has been viewed 24 times

  • 1.  Aruba Recommended Practice for Basic and Transmit Rates

    Posted Apr 04, 2018 03:20 AM

    Hello Experts, 

    What is the recommended practice from Aruba to enable selectively the "Basic" and "Transmit" Rates?

     

    Are the "Basic" and "Transmit Rates" in Aruba

    same as "Mandatory" and "Supported Rates" in Cisco?

     

    For a client device to associate on a WLAN, its is mandatory for the client device to support atleast on of the "Basic Rates" that are ticket against the SSID profile? While "Supported Rates" are those with which the clients will have actual assocation with the Access Point.



  • 2.  RE: Aruba Recommended Practice for Basic and Transmit Rates

    EMPLOYEE
    Posted Apr 04, 2018 08:18 AM

    The recommended practice is the defaults.  Users might want to optionally remove lower rates to force roaming or to lessen RF utilization, but not all clients can associate if the rates are not at the defaults.



  • 3.  RE: Aruba Recommended Practice for Basic and Transmit Rates

    EMPLOYEE
    Posted Apr 04, 2018 08:18 AM

    The recommended practice is the defaults.  Users might want to optionally remove lower rates to force roaming or to lessen RF utilization, but not all clients can associate if the rates are not at the defaults.