Wireless Access

Reply
Highlighted

Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

Hi Airheads,

 

I have a running deployment with 7240xm (Standalone) with ArubaOS 8.5.0.8 installed , recently i looked over the user-table via CLI and notice a lot of records of IPv6 client.

Screenshot:

2020-05-17_20-15-59.jpg

In the running-cfg i triple check , there is no ipv6 enabled in anyway or interface, i even just to be sure ran the command no ipv6 enable...but yet..client with ipv6 address are poping at the user-table.

 

Please advise. (Any fix? anyone also bumped into it?)

 

 

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Highlighted
Guru Elite

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

Highlighted

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

Hi ,

Thanks for the response,As i wrote in my post.

 

no ipv6 enable .... i triple did it (even due there isnt any ipv6 enabled in the running-cfg

 

regarding the no ipv6 firewall. ... (even due that in the GUI there isnt any V marked on the firewall ipv6 section , i notice the ipv6 firewall command at the running-cfg) BUT there isnt no command for ipv6 firewall,screenshot attached

2020-05-18_8-14-42.jpg

is this the cause? why it's running ?! i didn't checked ON ipv6 in stage of the deployment: 

2020-05-18_8-22-26.jpg

Please advise.

 

 

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Highlighted
Guru Elite

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

I apologize.  Wrong command.

 

What is the output of "show ipv6 global" on the controller?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

Disabled.

disabled.jpg

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Highlighted
Guru Elite

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

Did you try a "aaa user delete" to see if those users return when deleted?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

0del.jpg

0 users deleted - even due it's on on the user-table (every day)

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Highlighted

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

Also....

( I tried name & IP ) even due it's not an IPv4 address at all.

notipv4.jpg

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Highlighted
Guru Elite

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!

try aaa user delete all.

 

If that doesn't work, it is time to open a support case.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted

Re: Arubaos 8.5.0.8 - IPv6 disable , but still active clients showed with IPv6 in user-table?!


OK.
the IPv6 records are poping on daily base , even after full controller reboot.

So i think i will go with that to TAC.

Thanks for all the syntax debug with me
*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: