My setup is fairly simple. The Ap groups are mapped with "default" AP system profile and in the "default" AP system profile have defined the primary and backup LMS IPs.
However when I issue "show ap database" I do not see the Standby IP reflected for the back up LMS configured in the AP system profiles for the Mesh node APs(Mesh Portals and Mesh points).
What should I do to make sure the "standby IP" is reflected with "backup LMS IP" for the Mesh node IPs?
(WLC_0002) #show ap database
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
XXXXXXXXX5 Indoors 103 172.25.98.12 Up 1d:3h:38m:59s 2 10.200.0.12 10.200.0.11
XXXXXXXXX4 Indoors 135 172.25.106.19 Up 1d:3h:39m:3s 2 10.200.0.12 10.200.0.11
XXXXXXXXX3 Indoors 135 172.25.106.26 Up 1d:3h:39m:3s 2 10.200.0.12 10.200.0.11
XXXXXXXXX2 Portals 274 172.25.44.5 Up 1d:3h:45m:55s M2 10.200.0.12 0.0.0.0
XXXXXXXXX1 Portals 274 172.25.44.7 Up 1d:3h:45m:56s M2 10.200.0.12 0.0.0.0
XXXXXXXXX6 Portals 274 172.25.44.6 Up 1d:3h:45m:55s M2 10.200.0.12 0.0.0.0