Hi,
I have a MASTER/BACKUP scenario with VRRP configured. The MASTER went down and I could see all AP on the BACKUP controller, however the SSID where not broadcasted and the AP looked as they were not provvisioned (2.5 and 5 ghz leds off)
(SMPWC2) #
(SMPWC2) #show ap database
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
SMPAP1 Yoti_default 215 10.222.123.6 Down 2 10.222.123.2 0.0.0.0
SMPAP2 Yoti_default 103 10.222.123.14 Down 2 10.222.123.2 0.0.0.0
SMPAP3 Yoti_default 215 10.222.123.13 Down 2 10.222.123.2 0.0.0.0
SMPAP4 Yoti_default 215 10.222.123.12 Down 2 10.222.123.2 0.0.0.0
SMPAP5 Yoti_default 215 10.222.123.9 Down 2 10.222.123.2 0.0.0.0
SMPAP6 Yoti_default 215 10.222.123.11 Down 2 10.222.123.2 0.0.0.0
SMPAP8 Yoti_default 215 10.222.123.10 Down 2 10.222.123.2 0.0.0.0
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
i = Indoor; o = Outdoor
M = Mesh node; Y = Mesh Recovery