Wireless Access

Reply
Highlighted
Occasional Contributor II

Best Practice 7200 Controller interface connection

Hi, about this i have a doubt. A customer wants to purchase a 7200 controller and connected to switches from gig interfaces of the controller instead the ten gig interfaces. I would like to know if this is an valid option or what consequences could bring ?


Accepted Solutions
Highlighted
Moderator

Re: Best Practice 7200 Controller interface connection

No, it's not a platform limitation. It's based on the usage and behavior of your network and will vary in every scenario.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
Moderator

Re: Best Practice 7200 Controller interface connection

Yes, completely valid. Consequences would depend on AP/client count/load.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
Occasional Contributor II

Re: Best Practice 7200 Controller interface connection

Is there a chart or some document that could inform about limits in this?

Highlighted
Moderator

Re: Best Practice 7200 Controller interface connection

No, it's not a platform limitation. It's based on the usage and behavior of your network and will vary in every scenario.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Highlighted
Occasional Contributor II

Re: Best Practice 7200 Controller interface connection

Ok thanks !!