Nevermind i fixed it..
It seems it disconfigured the trusted value and thats why i couldnt get in... and it was configuring BEFORE trying to add the vlan...
Before trying to change it i did a show run
i had this
interface port-channel 5
trusted
trusted vlan 1-4094
switchport mode trunk
switchport trunk allowed vlan 1,3-4
!
Now after trying 3 times and my internet explorer crashing
it was like this
interface port-channel 5
trusted vlan 1-4094
switchport mode trunk
switchport trunk allowed vlan 1,3-4
!
Now i put it like it was
interface port-channel 5
trusted
trusted vlan 1-4094
switchport mode trunk
switchport trunk allowed vlan 1,3-4
!
Works fine again...
Now i saw why it was not working for me...
When you will add it through GUI you always HAVE to selectt trusted checkbox even if it already configured..... no matter if it already configured you have to mark the checkbox otherwise it will turn in untrusted and it will craash...
They should fix this... i mean if its already configured why its not marked when you go to it??? like the normal ports? if they are configured as trusted then the checkbox is trusted on port channel no matter if its configured trusted or untrusted the checkbox is not there... and you always have to select it
Now the NTP server adding, i did like you told me before i already put the way you said it doesnt work