Wireless Access

Reply
Highlighted
Occasional Contributor I

Build String Mismatch - VLAN

Hi All,

 

We currently have an error on our 7210 controllers running Aruba 8.3.0

 

Build String Mismatch - Image attached.

 

From what i first initially understand this is caused by a mismatch of VLAN's, the 160 VLAN in this situation is on both controllers. what else could be causing this error message?

 

Thanks,

Robert


Accepted Solutions
Highlighted
Occasional Contributor I

Re: Build String Mismatch - VLAN

this was an old error from when the controllers were rebooted during firmware upgrades. a reboot resolved the error but HPE support first got us to get the cluster into L2 mode as it was currently in L3 with the previous error.

View solution in original post


All Replies
Highlighted
Guru Elite

Re: Build String Mismatch - VLAN

All of the controllers in a cluster need to be running the exact same version of ArubaOS.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: Build String Mismatch - VLAN

Thanks for the reply, both controllers are running ArubaOS 8.3.0.3.

 

image attached of #show version, same on both controllers.

Highlighted
Occasional Contributor I

Re: Build String Mismatch - VLAN

this was an old error from when the controllers were rebooted during firmware upgrades. a reboot resolved the error but HPE support first got us to get the cluster into L2 mode as it was currently in L3 with the previous error.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: