Wireless Access

last person joined: 14 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Can APs/VAPs take different config in failover?

This thread has been viewed 1 times

  • 1.  Can APs/VAPs take different config in failover?

    EMPLOYEE
    Posted Dec 17, 2012 04:25 AM

    Hi,

     

    Just wondering if it is possible when APs fall over to their bk-lms-ip that they take slightly different configuration?

     

    I'm thinking that when the local controller is up, the VAPs are tunnelled and when they failover to a remote controller the VAPs are then bridged?

     

    I don't think this is possible, but would be great if it was.

     

    Thanks



  • 2.  RE: Can APs/VAPs take different config in failover?

    Posted Dec 17, 2012 06:09 AM

    you have to have the same AP Group Name in both controllers but with different configuration in each for the mode of operation.

     

    I belive this is the way to do it, if the AP lose the configuration from the first controller



  • 3.  RE: Can APs/VAPs take different config in failover?

    EMPLOYEE
    Posted Dec 17, 2012 06:12 AM

    Unfortunately that means two separate systems and we need to have cpsec enabled.