Hi,
We just purchased a bunch of 205s and 225s and we can't get access to them. I've read a lot on this board but haven't found anything that would solve my problems. We've tried 2x 225 and 2x 205 and we get the same problem for all four units.
We power all units using PoE, and they are connected to a DHCP server and getting an IP address no problem. We can also get into the console and did try resetting to factory defaults when things didn't work.
For the 205s:
Aruba OS version: 6.4.1.0
Power LED keeps blinkg green
ENET LED is solid yellow
5 GHz and 2.4 GHz LED are off.
We don't see the "instant" SSID, obviously because the radios are off.
We can't connect to the GUI by using the IP address we get from the DHCP server nor using instant.arubanetworks.comm we just get a page cannont be displayed message, no login screen.
We tried IE and Firefox, cleared cache, tried multiple factory reset through console.
We even tried without the DHCP server with the default IP we found in the documentation but no success there either.
For the 225s:
Aruba OS version: 6.4.3.4-FIPS
Power LED keeps blinkg green
ENET0 LED is solid/flashing green showing there is activity
ENET1 LED is off (port not connected)
5 GHz and 2.4 GHz LED are off.
We get the exact same issues as described above for the 205s, don't see the "instant" SSID and can't connect to the GUI. Tried all the same fixes/debugging and nothing works.
Also, when looking at the console and not stoping the autoboot to get to "apboot>" prompt, after a while the units just keep rebooting. The "Running ADP..." message appears for a while and the unit reboots. Not sure if this is normal behaviour or not.
Any help would be appreciated.
Thanks.