Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Can't use "write erase all" on CLI for Aruba 3600 Controller

This thread has been viewed 0 times

  • 1.  Can't use "write erase all" on CLI for Aruba 3600 Controller

    Posted Jul 25, 2019 09:10 PM

    Hello,

     

    I recently got a spare Aruba wireless controller 3600 from work. I have admin access into the CLI, but I cannot seem to default it to set it up as a new machine. Whenever I enter "write erase all" I get an error about an invalid input. Below is a screenshot of my issue. Any one know what I am doing wrong?

     

    https://i.imgur.com/9V0qpQE.png



  • 2.  RE: Can't use "write erase all" on CLI for Aruba 3600 Controller

    EMPLOYEE
    Posted Jul 25, 2019 10:22 PM

    You need to enter enable mode (enable and then enter the enable password). If you don't have the enable password, you will need to use the password recovery process, which is documented in multiple places.