Wireless Access

Reply
Highlighted
Occasional Contributor II

Check and apply SSID on ALL AP

Hello everyone

 

I created a ssid on the controller and i apply this ssid on a vap apply on a ap group

 

but when i check on monitoring

i see this ssid is not apply on all my AP

 

I would like to apply this ssid on all my AP

 

can you helpme  to this point

 

 

Thanx for advance

Highlighted
Guest Blogger

Re: Check and apply SSID on ALL AP

If you apply the VAP to an AP group, all APs in that AP group will broadcast the SSID. Is it possible that some APs are a member of a different AP group? Or could it be possible that you have overwritten the config for the specific APs?

 

@rene_booches | AMFX #26, ACMX #438, ACCX #725, ACDX #760, CCNP R&S, CEH | Co-owner/Solution Specialist@4IP / blog owner@booches.nl
Highlighted
Occasional Contributor II

Re: Check and apply SSID on ALL AP

Hello

tank for your answers

 

how i can check if there are any problem with the broadcast of this ssid ?

 

 

Highlighted
Occasional Contributor II

Re: Check and apply SSID on ALL AP

llo

 

I would like to know where is the configuration for assign this ssid or other ssid on ap ?

 

on my case i have 4 ssid id and wheni chenk on  monitoring

ssid a is affected on 10 ap

ssid b is affected on 30 ap

i dont have AP-goupe specific

 

Thank by advance for your anwsers an your time to help me

 

Best regards

 

Highlighted
Guest Blogger

Re: Check and apply SSID on ALL AP

Can you share your config or the output from the commands:

 

show ap database

show license-usage ap

 

@rene_booches | AMFX #26, ACMX #438, ACCX #725, ACDX #760, CCNP R&S, CEH | Co-owner/Solution Specialist@4IP / blog owner@booches.nl
Highlighted
Occasional Contributor II

Re: Check and apply SSID on ALL AP

Hello

 

yes i can but it's a extrac of the ouput with hidden field the ap database

 

Thnk for your beed back

 

Berst regards

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: