Wireless Access

Regular Contributor II

Client (MedFusion 4000) connection issue

We have been given MedFusion 4000 to give access to the wireless. I was able to get it to connect to the SSID.  The device display shows that it is associated to the wireless and gives the signal strength. It does not get an IP from the DHCP server. I go to the controller I see it connected but no IP. I checked the event log on the DHCP server, nothing about the device. I check a laptop to the same SSID with all the settings. It connects and gets an IP address.

I cannot get the information about the wireless NIC, only that it is 802.11 b/g.

Guru Elite

Re: Client (MedFusion 4000) connection issue

Are you using encryption?   What type? Has this device worked before?  Did you turn on debugging for that user?  config t  logging level debug user-debug <mac address>


show log user-debug all



*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Regular Contributor II

Re: Client (MedFusion 4000) connection issue

Department found out that we did not purchase the server that allows the devices to join wireless.

Search Airheads
Showing results for 
Search instead for 
Did you mean: