Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Configure IPSEC retries to be 0 via console?

This thread has been viewed 0 times

  • 1.  Configure IPSEC retries to be 0 via console?

    MVP EXPERT
    Posted Apr 15, 2014 02:27 PM

    I have an AP105 here which was previous configured as a RAP and used for site surveying. Currently the configuration on the controller has been removed so I cannot plug the AP back into the controller. My issue is that the AP is rebooting every few minutes or so as it cannot contact the master. I know via the controller I can set the IPSEC retries to be 0 but the controller is unusable at the moment.


    Can set the ipsec retries 0 (to stop the reboot) via the console connection?



  • 2.  RE: Configure IPSEC retries to be 0 via console?
    Best Answer

    MVP EXPERT
    Posted Apr 15, 2014 02:35 PM

    I've spotted this command whilst waiting, will give it a shot

     

    setenv num_ipsec_retry 0

     

    *EDIT* Looks like this command did the trick :)