Wireless Access

Reply
Frequent Contributor II

Configure a Mesh Portal AP to not serve clients directly in AOS8

In AOS6 there is this AP Specific section (which I don't understand why they removed it in AOS8) and in this section, we can customize a single AP without touching all other APs in a group. Since this isn't available in AOS8, I cannot remove the VAPs on an AP serving as Portal. I want this AP to only act as Portal and not serve any client. How can I do this in AOS8?

 

 

Highlighted
Guru Elite

Re: Configure a Mesh Portal AP to not serve clients directly in AOS8

AP-specific is only available on the commandline in AOS8.

 

config t

ap-name <name of ap> exclude-virtual-ap  

https://www.arubanetworks.com/techdocs/ArubaOS_85_Web_Help/Content/arubaos-solutions/1cli-commands/ap-name.htm?Highlight=ap-name


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: