Wireless Access

Reply
Occasional Contributor I

Configure syslong on Aruba650

Hi,

 

I use graylog to receive logs of all my equipment but i don't know how can i configure sylog service on aruba to send log on my graylog server.

I use the CLI interface

aruba.jpgPlease help me !

 

Regards

Guru Elite

Re: Configure syslong on Aruba650

That looks like it is sending syslog to 10.10.1.235


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Configure syslong on Aruba650

precisely not.

I don't receive anything and i don't know why

Guru Elite

Re: Configure syslong on Aruba650

What logging level do you have configured?  Configuring logging is detailed here:  https://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/Management_Utilities/Configuring_Logging.htm?Highlight=syslog


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Configure syslong on Aruba650

my configuration

aruba2.png

Guru Elite

Re: Configure syslong on Aruba650

The syslog facility on your syslog server needs to match what is on the controller to see any messages.  Please look at the link I posted to see if anything applies to your setup.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Configure syslong on Aruba650

i put informationnal level for few category

level.jpg

but stille nothing

 

Configuration of syslog service is correct ?aruba-udp-syslog.jpg 

 

Guru Elite

Re: Configure syslong on Aruba650

The default syslog port is 514.  Why do you have 5141 configured?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Configure syslong on Aruba650

why ?, i can't use this port ?

 

On my graylog server, port is listen

# netstat -an | grep 5141
udp6 0 0 :::5141 :::*

Guru Elite

Re: Configure syslong on Aruba650

You can use that port.

You just have to make sure your syslog is listening on the same facility that you have configured on the controller.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: